By using our website, you agree to the use of cookies as described in our Cookie Policy
For orders outside the US, contact us directly at throttleduprc@gmail.com
Protect your Team Associated B6.3 Chassis with the new 1up Racing B6.3 Chassis Protector! These feature a trick carbon fiber appearance with bold 1up Racing logo for an unmistakeable look! Heavy duty vinyl with extremely tacky adhesive was carefully selected to ensure long life, and an extra rear tail section is included for easy replacement of the highest-wear area. These are a perfect fit on the B6.3 +3mm chassis, and can easily be trimmed with our 1up Racing X-Life #11 Knife Blades to fit the standard length chassis.
Weight .05 lbs
Dimensions 13.5 × 5.5 × .05 in
Protect your Team Associated B74.1 Chassis with the new 1up Racing B74.1 Chassis Protector! These feature a trick carbon fiber appearance with bold 1up Racing logo for an unmistakeable look! Heavy duty vinyl with extremely tacky adhesive was carefully selected to ensure long life, and extra nose and tail sections are included for easy replacement of the highest-wear areas.
Weight .05 lbs
Dimensions 13.5 × 5.5 × .05 in
Protect your chassis and the track surface with our new 1up Racing Reusable Chassis Skin! These feature a trick carbon fiber appearance with bold 1up Racing logos for an unmistakeable look! Heavy duty vinyl with extremely tacky adhesive was carefully selected to ensure long life. The adhesive is so good you can peel this off and re-apply it up to 7-8 times!
Large 14 x 34cm surface area covers most all 1/10 vehicles. Once applied to the chassis, simply trim the excess material away with a hobby knife using our 1up Racing X-Life #11 Knife Blades to fit perfectly!
Weight .05 lbs
Dimensions 13.5 × 5.5 × .05 in
Protect your Team Associated B6.4 or B6.4D chassis and the track surface with our new 1up Racing Reusable Chassis Skin! These feature a trick carbon fiber appearance with bold 1up Racing logos for an unmistakeable look! Heavy duty vinyl with extremely tacky adhesive was carefully selected to ensure long life. The adhesive is so good you can peel this off and re-apply it up to 7-8 times!
Our AE B6.4/B6.4D fitment includes flaps for easy access to the servo screws, and a separate tailpiece section that allow access to all the screws necessary for servicing the rear of the car. Because we typically see the highest wear at the rear of the car, 2 extra tailpiece sections are included with every sheet!
Upgrade to the best-looking and most durable chassis skin out there, Pick 1up for your cars!
Our original design servo access flaps make it easy to remove your servo without removing the chassis skin.
Each sheet includes 3 tailpiece sections. These can be removed for easy access to all transmission and pivot block screws.
Weight .05 lbs
Dimensions 13.5 × 5.5 × .05 in
Protect your Team Associated B74.1 or B74.1D chassis and the track surface with our new 1up Racing Reusable Chassis Skin! These feature a trick carbon fiber appearance with bold 1up Racing logos for an unmistakeable look! Heavy duty vinyl with extremely tacky adhesive was carefully selected to ensure long life. The adhesive is so good you can peel this off and re-apply it up to 7-8 times!
Our AE B74.1/B74.1D fitment includes spare nose and tailpiece sections as we see the highest wear in these areas.
Upgrade to the best-looking and most durable chassis skin out there, Pick 1up for your cars!
Weight .05 lbs
Dimensions 13.5 × 5.5 × .05 in
Protect your TLR 22 5.0 chassis and the track surface with our new 1up Racing Reusable Chassis Skin! These feature a trick carbon fiber appearance with bold 1up Racing logos for an unmistakeable look! Heavy duty vinyl with extremely tacky adhesive was carefully selected to ensure long life. The adhesive is so good you can peel this off and re-apply it up to 7-8 times!
Our TLR 22 5.0 fitment includes flaps for easy access to the servo screws, and a separate tailpiece section that allow access to all the screws necessary for servicing the rear of the car. Because we typically see the highest wear at the rear of the car, 2 extra tailpiece sections are included with every sheet!
Upgrade to the best-looking and most durable chassis skin out there, Pick 1up for your cars!
Our original design servo access flaps make it easy to remove your servo without removing the chassis skin.
Each sheet includes 3 tailpiece sections. These can be removed for easy access to all transmission and pivot block screws. (AE fitment pictured)
Weight .05 lbs
Dimensions 13.5 × 5.5 × .05 in
Protect your TLR 22X-4 chassis and the track surface with our new 1up Racing Reusable Chassis Skin! These feature a trick carbon fiber appearance with bold 1up Racing logos for an unmistakeable look! Heavy duty vinyl with extremely tacky adhesive was carefully selected to ensure long life. The adhesive is so good you can peel this off and re-apply it up to 7-8 times!
Our TLR 22X-4 fitment includes spare nose and tailpiece sections as we see the highest wear in these areas.
Upgrade to the best-looking and most durable chassis skin out there, Pick 1up for your cars!
Weight .05 lbs
Dimensions 13.5 × 5.5 × .05 in
Protect your TLR 22 5.0 Chassis with the new 1up Racing Protective Chassis Skin! These feature a trick carbon fiber appearance with bold 1up Racing logo for an unmistakeable look! Heavy duty vinyl with extremely tacky adhesive was carefully selected to ensure long life, and an extra rear tail section is included for easy replacement of the highest-wear area.
Weight .05 lbs
Dimensions 13.5 × 5.5 × .05 in
Protect your chassis with the new 1up Racing Universal Protective Chassis Skin! These feature a trick carbon fiber appearance with bold 1up Racing logo for an unmistakeable look! Heavy duty vinyl with extremely tacky adhesive was carefully selected to ensure long life.
Large 15 x 34cm surface area covers most all 1/10 vehicles. Once applied to the chassis, simply trim the excess material away with a hobby knife using our 1up Racing X-Life #11 Knife Blades to fit perfectly!
Weight .05 lbs
Dimensions 13.5 × 5.5 × .05 in