Description

On-Road Nitro Racers – Have you ever needed to quickly adjust your 2-Speed or change a stripped spur gear?

The answer to that is: Duh!

1up Racing Quik 2-Speed Clips are an absolute-no brainer, a must-have item in every 1/8 – 1/10 Nitro TC Racer’s pit bag. These feature an oversize tab making them easy to remove for lightning fast 2-speed adjustments and gear changes! Once in place our durable steel clips hold tight and can be reused with confidence over and over again!

Quik 2-Speed Clips are loved by the Pros, don’t get caught without them on your cars, order today!

Includes 6 pieces per bag.

Compatible with all 2 speed transmissions using a 6 to 8mm shaft.

Additional information

Weight .01 lbs
Dimensions 3 × 2 × .125 in

Available in 2 sizes to fit 7 and 8mm diameter front posts, select size in the drop down below.

(7mm fits Serpent front posts, most others are 8mm.)

Description

Place the WellCuts over the front body posts with the magnets facing the rear of the car and secure them with 2 body clips.

After using the WellCut Template to cut out the rear of the car, set the body on the car and drop the front 2 outer magnets into place. The super strong magnets will immediately center themselves!

Use a fine tip black permanent marker to mark the center hole.

Remove the body and cut the 2 holes with a body reamer and you’re set! The WellCut for 1/8 Front Body posts is a must have in any 1/8 nitro racer’s tool box!

Additional information

Weight .03 lbs
Dimensions 3 × 2 × .5 in
Select Body Post Diameter 7mm Post, 8mm Post

A set of 4 WellRC Racing WellCut Magnets for 1/8 GT Body Posts.

Additional information

Weight .03 lbs
Dimensions 3 × 2 × .3 in

Universal size fits most 1/10 and 1/8 exhaust stingers!

Description

Cut the perfect hole for your exhaust stinger every time with the WellCut for Exhaust Outlet! Just slide the WellCut into place and align it so the outer edge sits parallel against the body.

Drop the included outer magnet into place and use a fine tip permanent marker to mark the center hole.

Use a body reamer to cut the hole and enjoy perfect results time after time!

Additional information

Weight .02 lbs
Dimensions 3 × 2 × .25 in
Select Body Post Diameter 7mm Post, 8mm Post

The WellRC Racing WellCut On-Road Lower Cut Line Tool makes quick work of marking accurate lower cut lines on the front and sides of on-road bodies! Use this with a standard Sharpie marker (not included) that’s probably already in your tool box!

Positions the marker in 10, 11, 12 and 13mm heights which are clearly identified at the top of the gauge. Perfect for bumpy or high-grip tracks where extra clearance is needed.

Additional information

Weight .02 lbs
Dimensions 3 × 2 × 1 in

The WellRC Racing WellCut On-Road Lower Cut Line Tool makes quick work of marking accurate lower cut lines on the front and sides of on-road bodies! Use this with a standard Sharpie marker (not included) that’s probably already in your tool box!

Positions the marker in 6, 7, 8 and 9mm heights which are clearly identified at the top of the gauge.

Additional information

Weight .01 lbs
Dimensions 3 × 2 × .25 in

Additional information

Weight .03 lbs
Dimensions 2.5 × 2.5 × .5 in
Select Fitment Nitro TC, Electric TC, 1/8 On-Road, GT8, 1/5 On-Road

Description

Introducing a must-have tool for Nitro On-Road Racers, the WellRC WellCut Nitro TC Fueling Hole Template!

Let’s face it, marking the fueling hole typically isn’t a fun task, but the WellCut makes it simple and easy. Four outer gripping surfaces ensure the WellCut stays put when in use and the included holes can be marked for easy alignment once you’ve found the perfect position. Made from flexible material to easily contour to any body for repeatable results every time. Make your life easier with the WellRC WellCut Nitro TC Fueling Hole Template!

Available in 50mm and 60mm sizes, both ROAR and EFRA legal. 50mm reduces body flex for a more consistent feel, especially on large tracks. 60mm will increase body flex, but makes filling the car easier.

Additional information

Weight .04 lbs
Dimensions 3 × 2 × .125 in

Description

Introducing a must-have tool for Nitro On-Road Racers, the WellRC WellCut Nitro TC Fueling Hole Template!

Let’s face it, marking the fueling hole typically isn’t a fun task, but the WellCut makes it simple and easy. Four outer gripping surfaces ensure the WellCut stays put when in use and the included holes can be marked for easy alignment once you’ve found the perfect position. Made from flexible material to easily contour to any body for repeatable results every time. Make your life easier with the WellRC WellCut Nitro TC Fueling Hole Template!

Available in 50mm and 60mm sizes, both ROAR and EFRA legal. 50mm reduces body flex for a more consistent feel, especially on large tracks. 60mm will increase body flex, but makes filling the car easier.

Additional information

Weight .04 lbs
Dimensions 3 × 2 × .125 in

Description

Have you ever wished you could dock your ARC 8.2/8.3 on it’s starter box faster? If yes, then the WellDock v2 is for you!

The WellDock v2 is a direct fit for the Hudy Star-Box and mounts with existing hardware. These feature oversize plates which make docking your car faster and easier than ever.

WellRC’s Walter Diaz updated the v2 design to include a honeycomb pattern for 1/8 fitments, while the 1/10 fitments have a smooth surface. This ensures you never grab the wrong box when in a rush.

Made in the USA from high quality ABS plastic to ensure the WellDock v2 can hold up to any punishment you send it’s way!

Installs easily with existing hardware.

Additional information

Weight .07 lbs
Dimensions 4 × 3 × .3 in

Description

Have you ever wished you could dock your Capricorn C04 on it’s starter box faster? If yes, then the WellDock v2 is for you!

The WellDock v2 is a direct fit for the Hudy Star-Box and mounts with existing hardware. These feature oversize plates which make docking your car faster and easier than ever.

WellRC’s Walter Diaz updated the v2 design to include a honeycomb pattern for 1/8 fitments, while the 1/10 fitments have a smooth surface. This ensures you never grab the wrong box when in a rush.

Made in the USA from high quality ABS plastic to ensure the WellDock v2 can hold up to any punishment you send it’s way!

Installs easily with existing hardware.

Additional information

Weight .07 lbs
Dimensions 4 × 3 × .3 in

Description

Have you ever wished you could dock your Capricorn C804 on it’s starter box faster? If yes, then the WellDock v2 is for you!

The WellDock v2 is a direct fit for the Hudy Star-Box and mounts with existing hardware. These feature oversize plates which make docking your car faster and easier than ever.

Made in the USA from high quality ABS plastic to ensure the WellDock v2 can hold up to any punishment you send it’s way!

Installs easily with existing hardware.

Additional information

Weight .07 lbs
Dimensions 4 × 3 × .3 in

Description

Have you ever wished you could dock your Infinity IF15 on it’s starter box faster? If yes, then the WellDock v2 is for you!

The WellDock v2 is a direct fit for the Hudy Star-Box and mounts with existing hardware. These feature oversize plates which make docking your car faster and easier than ever.

WellRC’s Walter Diaz updated the v2 design to include a honeycomb pattern for 1/8 fitments, while the 1/10 fitments have a smooth surface. This ensures you never grab the wrong box when in a rush.

Made in the USA from high quality ABS plastic to ensure the WellDock v2 can hold up to any punishment you send it’s way!

Installs easily with existing hardware.

Additional information

Weight .07 lbs
Dimensions 4 × 3 × .3 in

Description

Have you ever wished you could dock your Infinity IF18 on it’s starter box faster? If yes, then the WellDock v2 is for you!

The WellDock v2 is a direct fit for the Hudy Star-Box and mounts with existing hardware. These feature oversize plates which make docking your car faster and easier than ever.

WellRC’s Walter Diaz updated the v2 design to include a honeycomb pattern for 1/8 fitments, while the 1/10 fitments have a smooth surface. This ensures you never grab the wrong box when in a rush.

Made in the USA from high quality ABS plastic to ensure the WellDock v2 can hold up to any punishment you send it’s way!

Installs easily with existing hardware.

Additional information

Weight .07 lbs
Dimensions 4 × 3 × .3 in

Description

Have you ever wished you could dock your Mugen MRX on it’s starter box faster? If yes, then the WellDock v2 is for you!

The WellDock v2 is a direct fit for the Hudy Star-Box and mounts with existing hardware. These feature oversize plates which make docking your car faster and easier than ever.

The WellDock v2 is a direct fit for the Hudy Star-Box and mounts with existing hardware. These feature oversize plates which make docking your car faster and easier than ever.

Made in the USA from high quality ABS plastic to ensure the WellDock v2 can hold up to any punishment you send it’s way!

Installs easily with existing hardware.

Additional information

Weight .07 lbs
Dimensions 4 × 3 × .3 in

Description

Have you ever wished you could dock your Mugen MTX on it’s starter box faster? If yes, then the WellDock v2 is for you!

The WellDock v2 is a direct fit for the Hudy Star-Box and mounts with existing hardware. These feature oversize plates which make docking your car faster and easier than ever.

WellRC’s Walter Diaz updated the v2 design to include a honeycomb pattern for 1/8 fitments, while the 1/10 fitments have a smooth surface. This ensures you never grab the wrong box when in a rush.

Made in the USA from high quality ABS plastic to ensure the WellDock v2 can hold up to any punishment you send it’s way!

Installs easily with existing hardware.

Additional information

Weight .07 lbs
Dimensions 4 × 3 × .3 in

Description

Have you ever wished you could dock your Serpent 750 on it’s starter box faster? If yes, then the WellDock v2 is for you!

The WellDock v2 is a direct fit for the Hudy Star-Box and mounts with existing hardware. These feature oversize plates which make docking your car faster and easier than ever.

WellRC’s Walter Diaz updated the v2 design to include a honeycomb pattern for 1/8 fitments, while the 1/10 fitments have a smooth surface. This ensures you never grab the wrong box when in a rush.

Made in the USA from high quality ABS plastic to ensure the WellDock v2 can hold up to any punishment you send it’s way!

vInstalls easily with existing hardware.

Additional information

Weight .07 lbs
Dimensions 4 × 3 × .3 in

Description

Have you ever wished you could dock your Serpent 989 on it’s starter box faster? If yes, then the WellDock v2 is for you!

The WellDock v2 is a direct fit for the Hudy Star-Box and mounts with existing hardware. These feature oversize plates which make docking your car faster and easier than ever.

WellRC’s Walter Diaz updated the v2 design to include a honeycomb pattern for 1/8 fitments, while the 1/10 fitments have a smooth surface. This ensures you never grab the wrong box when in a rush.

Made in the USA from high quality ABS plastic to ensure the WellDock v2 can hold up to any punishment you send it’s way!

Installs easily with existing hardware.

Additional information

Weight .07 lbs
Dimensions 4 × 3 × .3 in

Description

Have you ever wished you could dock your XRay NT1 on it’s starter box faster? If yes, then the WellDock v2 is for you!

The WellDock v2 is a direct fit for the Hudy Star-Box and mounts with existing hardware. These feature oversize plates which make docking your car faster and easier than ever.

WellRC’s Walter Diaz updated the v2 design to include a honeycomb pattern for 1/8 fitments, while the 1/10 fitments have a smooth surface. This ensures you never grab the wrong box when in a rush.

Made in the USA from high quality ABS plastic to ensure the WellDock v2 can hold up to any punishment you send it’s way!

Installs easily with existing hardware.

Additional information

Weight .07 lbs
Dimensions 4 × 3 × .3 in

Description

Increase the lifespan of your Capricorn C04’s body with the WellProtected Front Bumper Support by WellRC! Created to prevent front body flex on nitro cars, the WellProtected Front Bumper Support absorbs most of the impact from front collisions resulting in far less damage to the car and body.

An added handling benefit confirmed by our Factory Drivers is increased stability and predictability. This allowed them to confidently push their cars harder, especially at high-speed where stability is incredibly important!

Made from durable and flexible material with honeycomb design, the WellProtected Bumper will always return to it’s original shape even after hard impacts. We fully expect this high-quality product to outlast any car it’s mounted to and consider these a very smart investment for any racer!

Additional information

Weight .03 lbs
Dimensions 2.75 × 1.75 × .5 in

Description

Increase the lifespan of your Mugen MTX7’s body with the WellProtected Front Bumper Support by WellRC! Created to prevent front body flex on nitro cars, the WellProtected Front Bumper Support absorbs most of the impact from front end collisions resulting in far less damage to the car and body.

An added handling benefit confirmed by our Factory Drivers is increased stability and predictability. This allowed them to confidently push their cars harder, especially at high-speed where stability is incredibly important!

Made from durable and flexible material with honeycomb design, the WellProtected Bumper will always return to it’s original shape even after hard impacts. We fully expect this high-quality product to outlast any car it’s mounted to and consider these a very smart investment for any racer!

Additional information

Weight .04 lbs
Dimensions 4 × 1.75 × .6 in