Additional information

Weight 0.01 lbs
Dimensions 3 × 2 × 0.2 in

Description

B6.2 Wing Mount Set Includes:

Wing Mounts

Wing Mount Shim

Wing Buttons

Wing Mount Spacers

Additional information

Weight 0.03 lbs
Dimensions 6 × 3 × 0.5 in

Additional information

Weight .02 lbs
Dimensions 3.5 × 4 × .5 in

Additional information

Weight 0.04 lbs
Dimensions 4 × 3 × 1 in

Additional information

Weight 0.01 lbs
Dimensions 3 × 2 × 0.25 in

Additional information

Weight 0.01 lbs
Dimensions 3 × 2 × 0.125 in

Description

RC10B6 Hinge Pin Set Includes:

2 3x26mm Hinge Pins

4 3x34mm Hinge Pins

2 3.5x48mm Hinge Pins

Additional information

Weight 0.03 lbs
Dimensions 3 × 2 × 0.125 in

Additional information

Weight .02 lbs
Dimensions 3 × 3 × .125 in

Additional information

Weight .01 lbs
Dimensions 3 × 2 × .125 in

Description

RC10B6.4 Anti-roll Bar Hardware Set Includes:

Anti-Roll Bar Collar

4 Anti-Roll Bar Pivots (Metric)

7 Set Screws [M3x0.5x3mm]

2 Set Screws [M3x0.5×10]

2 Screws, M2.5×0.45x6mm BHCS

Front Anti-Roll Bar Collar, B6

Set Screw [M3x0.5×2.5mm]

Additional information

Weight 0.02 lbs
Dimensions 3 × 2 × 0.25 in

Additional information

Weight 0.09 lbs
Dimensions 4 × 3 × 1 in

Additional information

Weight 0.09 lbs
Dimensions 4 × 3 × 1 in

Description

The #92011 Arm Mount Inserts 1/0.5 are molded in black plastic and come with eight per package. Get these to try new settings not previously available with the current inserts. The 1/0.5 inserts help “fill in the blanks” and give a 0.5 step option where you previously only could adjust things in 1.0 steps, 1.0-up or 1.0-corner, filling out the finer settings on the outer perimeter of our current adjustment grid.

The new design holds the hinge pin 1 degree (or 0.7mm) offset UP and 0.5 degree (or 0.35mm) offset IN or OUT. When turned sideways, racers can do 1 degree OUT and 0.5 degree UP or DOWN.

There is a Type 1 and Type 2 cavity (hole locations must mirror each other) so you must watch when installing to keep them symmetrical. This visual chart is your master key showing part orientation.

Click on the Documents tab for options on using the inserts.

Additional information

Weight 0.01 lbs
Dimensions 3 × 2 × 0.25 in

Description

Arm Mount Insert Set Includes:

4pcs Arm Mount Insert [0,0]

4pcs Arm Mount Insert [0,0.35]

4pcs Arm Mount Insert [0,0.7]

4pcs Arm Mount Insert [0.35,0.35]

4pcs Arm Mount Insert [0.7,0.7]

Additional information

Weight 0.02 lbs
Dimensions 5 × 5 × 0.4 in

Description

Factory Team Carbon Fiber Rear Hub Link Shim Set Includes:

2 Rear Hub Link Shims 0.5mm

2 Rear Hub Link Shims 1.0mm

2 Rear Hub Link Shims 2.0mm

Additional information

Weight 0.01 lbs
Dimensions 3 × 2 × 0.1 in

Description

RC10B6.3 FT Arm Mount C, wide, brass

Brass version of the wide-pivot RC10B6.3 Arm Mount C Used to tune weight bias, moves weight further back in the car Weight=23g vs. 4g for the stock aluminum version

Additional information

Weight .05 lbs
Dimensions 3 × 2 × .5 in

Additional information

Weight 0.02 lbs
Dimensions 3 × 3 × 0.1 in

Additional information

Weight 0.04 lbs
Dimensions 4 × 3 × 1 in

Description

RC10B6.2 FT Rear Suspension Arms 75mm, carbon fiber

• Lightweight – Approximately 12% weight savings over “hard” material.
• Extreme Rigidity – More predictable handling in high traction applications and increased vehicle stability in fast corners.
• Significantly improved strength over “hard” option parts.

Additional information

Weight .08 lbs
Dimensions 4 × 3 × .5 in

Description

RC10B6.2 FT Rear Suspension Arms 73mm, carbon fiber

• Lightweight – Approximately 12% weight savings over “hard” material.
• Extreme Rigidity – More predictable handling in high traction applications and increased vehicle stability in fast corners.
• Improved Durability – Significantly improved strength over “hard” option parts.

Additional information

Weight .08 lbs
Dimensions 4 × 3 × .5 in

Description

RC10B6.3 FT Wing Mount Brace Set, aluminum

Brace prevents bending and twisting under impact Extends the life of the wing mount assembly Blue anodized aluminum, fasteners included

Additional information

Weight .01 lbs
Dimensions 3 × 2 × .2 in