This listing is for T-Connector(Deans) 1 male, 1 female and 4 pieces of heat shrink

This listing is for T-Connector(Deans) 2 female and 4 pieces of heat shrink

This listing is for T-Connector(Deans) 2 male and 4 peices of heat shrink

These are bonded together flat style sensor wires, that are all black in color, made with silicone coated high strand count wire. 

Our High quality sensor wires ensure a shock absorbing and unrestricted movement ,all while ensuring reliable and seamless data transfer between your Speed Control and motor.

Choose from either our flat or tube style sensor wires, for the cleanest and most reliable wiring jobs, in any of our 9 sizes.

Features:

• Extremely Flexible
• Durable Silicone Wire
• Tube Construction
• High Quality Crimping
• Flat or Tube Style
• 50mm-275mm in length
• Black connectors, and wire

1 Sensor wire Per listing

Please note that if your lead is less than 12" we can only use the primary sheathing color! Additionally, if you choose to install the upgrade kit, you will need a very strong iron, your typical one will likely not unsolder the stock wires.

Tired of looking at the ugly EC5 connector on your Icharger? I know we were, so we did something about it! 

We also eliminated the black/red cables, to a fully sheathed option, with custom heat shrink available.
 Make your icharger YOURS! No need for 6 foot of rubber banded ugliness in the back of your pit!

With this we remove the Blue EC5 connector and eliminate the charger's lead (from charger to power supply) for any Icharger Duo Series. 

Your finished Icharger will have a 4mm connector, that can plug right into your power supply. 

Don't spend hours and risk messing up your icharger, send it to the professionals.

Each charger is tested prior to us opening it up, to make sure it works properly. We also test it after we finish it, to make sure that it is functional. We will store these videos for 90 days, after you receive your charger back.

If selected you are required to send your charger into us, the postal services often are not careful with packages. Be sure to pack your items WELL. For best results, we recommend sending in your power supply and charger stand as well. If you select this option, please make sure the ESC is to us by the 1 week prior to the shipment date. If it shows up after that, your order is subject to delays.

Inertia Screws - Hardened Steel Screws - Countersunk (10 pcs)

• Inertia screws have been tested by industry professionals and are raced by our team.
• Inertia screws meet and exceed our strictest guidelines for tolerance, size, fitment, and strength.
• Inertia Grade 10.9 or 12.9 metric bolts are manufactured using medium carbon steel that has been quenched, tempered, and exhibit high tensile strength coupled with good wear resistance.
• Inertia countersunk screws have a optimized head diameter and angle to ensure that when installed they sit just below the surface of the chassis.

Sold in packages of 10.

These are designed to connector your power supply to your charger. Please note that if the lead is not 12" in length the PRIMARY sheathing color can only be used. 

This lead is meant to plug into a stand alone discharge bank.

These are customized discharge leads. Each lead is hand crafted JUST for you, right here in the USA! Our le leads are known for their durability, reliability, and customization. These are our the 2023 charger leads (newest version)

• New bullet connectors (designed by DRC for you) Hi-Amp solid design gold plated bullet connectors have a superior amp carrying ability, and are more durable, reliable, have a lower internal resistance, and have a longer lifespan than industry standard connectors. 
• Made with our Leveled up INSANELY high (1200+) strand count wire. This allows for Hi- amp rapid charging, with a super LOWresistance.* 
• Made with quadruple wall dual adhesive heat shrink, for extreme durability and a super clean look. 
• Free warranty (please see warranty information for additional details).
• Plugs directly into most dis/chargers.
• New sheathing reinforcement, to prevent the sheathing from fraying.

Please note that this is for one lead per listing.

These are designed to exceed all current codes and regulations.

Each lead is hand crafted JUST for you, right here in the USA! Our leads are known for their durability, reliability, and customization.

• New Intuitive Design, for ease of use.
• Made with our Leveled up INSANELY high (1600+) strand count wire. This allows for Hi- amp rapid charging, with a super LOWresistance.*
• Extremely flexible and can bend in any direction.
• Free warranty (please see warranty information for additional details).

Rated for 15 amps

*1600 strand count for black 12 awg only.

Please note that this is for one lead per listing.

These are designed to exceed all current codes and regulations.

Each lead is hand crafted JUST for you, right here in the USA! Our leads are known for their durability, reliability, and customization.

• New Intuitive Design, for ease of use.
• Made with our Leveled up INSANELY high (1200+) strand count wire. This allows for Hi- amp rapid charging, with a super LOWresistance.*
• Extremely flexible and can bend in any direction.
• Free warranty (please see warranty information for additional details).

The USB are rated at 3.1 amps.

The outlet is rated for 15 amps.

*1200 strand count for black 12 awg only.

Please note that this is for one lead per listing.

These are designed to connector your power supply to a 110v outlet.

These are customized power supply leads. Each lead is hand crafted JUST for you, right here in the USA! Our  leads are known for their durability, reliability, and customization.

• New Intuitive Design, for ease of use.
• Made with our Leveled up INSANELY high (1200+) strand count wire. This allows for Hi- amp rapid charging, with a super LOWresistance.*
• Extremely flexible and can bend in any direction.
• Free warranty (please see warranty information for additional details).
• New sheathing reinforcement, to prevent sheathing from fraying/pulling out

*1200 strand count for black 12 awg only.

Please note that this is for one lead per listing.

4.25mm diameter shaft: ensures a snug fit for the best connection

6 mm head: provides large area to grip, reducing stress on wires

3 mm wire opening: Allows for use with 12 or lower awg wires

15 mm shaft: promotes lower resistance and increase connection area

Solid design: for long life

Gold plated: gold is one of the lowest resistance, and best conductive materials known to man!

• 2 Connectors
• 3 Set Screws

5.25mm diameter shaft: ensures a snug fit for the best connection

6 mm head: provides large area to grip, reducing stress on wires

3 mm wire opening: Allows for use with 12 or lower awg wires

15 mm shaft: promotes lower resistance and increase connection area

Solid design: for long life

Gold plated: gold is one of the lowest resistance, and best conductive materials known to man!

• 2 Connectors
• 3 Set Screws

We are proud to bring back our lipo safe, we are also excited to announce our new lipo bag!

 Our premium lipo bags are made from the highest-grade materials possible, featuring an all-black inside and outside with the DRC logo and warning label.

• Normal bags are made with 600-degree Celsius rated material, our bags are made with 1200-degree Celsius rated material.
• Normal bags are made with regular stitches and seams, our bags are made with flame retardant stitches and seams.
• Normal bags are made out of stiff fiberglass material and not easy to use, our bags are made out of high tech, state of the art material which allow for ease of use, and increased protection.
• Normal bags have a very limited time to contain lipo fires/explosions, our bags can withstand continuous fire and explosion because of the materials used.
• Normal bags get dirty very quickly, and are unseemly to look at, our bags are made out of all black material (inside and out) with our DRC logo and warning label in white.

Length 11.75” (300mm) x Width 9” (230mm) x Height 2” (50mm)

Storage recommendations:

• Up to 12 1s batteries
• 8 2s batteries
• 6 3s batteries
• 4 4s or higher batteries

Charging Recommendations: Up to 2 batteries per safe/bag.

Our premium lipo bags are made from the highest-grade materials possible, featuring an all-black inside and outside with the DRC logo and warning label.

• Normal bags are made with 600-degree Celsius rated material, our bags are made with 1200-degree Celsius rated material.
• Normal bags are made with regular stitches and seams, our bags are made with flame retardant stitches and seams.
• Normal bags are made out of stiff fiberglass material and not easy to use, our bags are made out of high tech, state of the art material which allow for ease of use, and increased protection.
• Normal bags have a very limited time to contain lipo fires/explosions, our bags can withstand continuous fire and explosion because of the materials used.
• Normal bags get dirty very quickly, and are unseemly to look at, our bags are made out of all black material (inside and out) with our DRC logo and warning label in white.

The smaller lipo safe measures:

Length 7.25” (185mm) x Width 3” (75mm) x Height 2.35” (60mm)

Storage recommendations:

Up to 6 1s batteries

• 4 2s batteries
• 3 3s batteries
• 1 4s or higher battery.

Charging Recommendations: Up to 2 batteries per safe/bag.

Specifications:

• Wire Length: 36"
• Power type: USB 5 volt
• Temperature: 3 settings 110 Degrees (red), 100 Degrees (white), 90 Degrees (blue)
• Color: All Black with White DRC logo
• LiPo Sleeve Dimensions: 120mm (length) x 45mm (width) x 25mm (height)
• Expanded Sleeve Dimensions: 120mm (length) x 45mm (width) x 55mm (height)

Description: 

This is version 2 of the DRC LiPo heating product. This is meant to be used IN a LiPo bag and is not completely flame retardant on its own. It is made out of flame retardant material. The V2 features a super flexible wire, blacked out heating elements, and is more reliable. Click here for Heated LiPo Sleeve recommendations

This will expand to fit up to: 

• 3, 1s LiPo

OR

• 2, 2s LiPos

OR

• 1 4s LiPo

This does have 4 heating elements one on each side, this ensures equal and controlled heat distribution.

* Degrees are in Fahrenheit, and approximate. Many factors control the temperature of the unit.

Please note the batteries in the pictures are not included with the listing.

These are bonded together flat style sensor wires, that are all black in color, made with silicone coated high strand count wire. 

Our High quality sensor wires ensure a shock absorbing and unrestricted movement ,all while ensuring reliable and seamless data transfer between your Speed Control and motor.

Choose from either our flat or tube style sensor wires, for the cleanest and most reliable wiring jobs.

Features:

• Reinforced Connectors
• Extremely Flexible
• Durable Silicone Wire
• Tube Construction
• High Quality Crimping
• Flat or Tube Style
• 50mm-275mm in length
• Black connectors, and wire

1 Sensor wire Per listing

These are fully protected sensor wires. due to extra protection these are not as flexible as our other sensor wires..

Our High quality sensor wires ensure a reliable and seamless data transfer between your Speed Control and motor.

Features:

• Reinforced Connectors
• Extremely Flexible
• Durable Silicone Wire
• Tube Construction
• High Quality Crimping
• Flat or Tube Style
• 50mm-275mm in length
• Black connectors, and wire

1 Sensor wire Per listing

These are bonded together flat style sensor wires, that are all black in color, made with silicone coated high strand count wire. 

Our High quality sensor wires ensure a shock absorbing and unrestricted movement ,all while ensuring reliable and seamless data transfer between your Speed Control and motor.

Choose from either our flat or tube style sensor wires, for the cleanest and most reliable wiring jobs.

Features:

• Reinforced Connectors
• Extremely Flexible
• Durable Silicone Wire
• Tube Construction
• High Quality Crimping
• Flat or Tube Style
• 50mm-275mm in length
• Black connectors, and wire

1 Sensor wire Per listing

These are super flexible sensor wires, that are all black in color, made with silicone coated high strand count wire. 

Our High quality sensor wires ensure a shock absorbing and unrestricted movement ,all while ensuring reliable and seamless data transfer between your Speed Control and motor.

Choose from either our flat or tube style sensor wires, for the cleanest and most reliable wiring jobs, in any of our 9 sizes.

Features:

• Extremely Flexible
• Durable Silicone Wire
• Tube Construction
• High Quality Crimping
• Flat or Tube Style
• 50mm-200mm in length
• Black connectors, and wire

1 Sensor wire Per listing

These kits are designed for Touring Cars.

t should be noted that all of the screws in the kit will be m3 size, other sizes not yet available.

The aluminum screws we have in stock are 6mm, 8mm, and 10mm (buttonhead only), all other m3 sizes for that car will be substituted with steel screws. We only include aluminum screws for the applicable places, if an area is deemed high-stress we substitute it with a steel screw.

Please note that if you have non stock parts on your car, there may be different screws needed. Our screw kits are pulled from the manuals of the stock vehicles.

These are designed to connector your power supply to a 110v outlet.

These are customized power supply leads. Each lead is hand crafted JUST for you, right here in the USA! Our  leads are known for their durability, reliability, and customization.

• New Intuitive Design, for ease of use.
• Made with our Leveled up INSANELY high (1200+) strand count wire. This allows for Hi- amp rapid charging, with a super LOWresistance.*
• Extremely flexible and can bend in any direction.
• Free warranty (please see warranty information for additional details).
• New sheathing reinforcement, to prevent sheathing from fraying/pulling out

*1200 strand count for black 12 awg only.

Please note that this is for one lead per listing.