For orders outside the US, contact us directly at email@example.com
Available in 2 sizes to fit 7 and 8mm diameter front posts, select size in the drop down below.
(7mm fits Serpent front posts, most others are 8mm.)
Place the WellCuts over the front body posts with the magnets facing the rear of the car and secure them with 2 body clips.
After using the WellCut Template to cut out the rear of the car, set the body on the car and drop the front 2 outer magnets into place. The super strong magnets will immediately center themselves!
Use a fine tip black permanent marker to mark the center hole.
Remove the body and cut the 2 holes with a body reamer and you’re set! The WellCut for 1/8 Front Body posts is a must have in any 1/8 nitro racer’s tool box!
Weight .03 lbs
Dimensions 3 × 2 × .5 in
Select Body Post Diameter 7mm Post, 8mm Post